Order No. I-3336 (white) Price per unit EUR 3,10 Order No. I-3331 (charcoal) Price per unit EUR 3,60
Pure sheep's wool If you prefer natural fabric: Visaton sheep's wool with good damping properties. For each 20 cdm (litre) cabinet volume 1 to 1.5 packets are needed. Packaging and size is the same as with Sonofile, but double thickness.
Order No. V-5069 Price per unit EUR 7,90
Bondum 800 damping Bondum 800 is a material damping frequencies above 800 Hz. Measurements: 300 x 500 x 20 mm
Order No. I-3325 Price per unit EUR 2,60
Bitumen board with cotton lining BAWOTUMEX is a bitumen board with cotton lining to reduce structure-borne noise. It needs to be glued to the inside of cabinet panels (also for automotive applications). BAWOTUMEX sheets are sized 245 x 325 mm with a thickness of 18 mm and a weight of approx. 9 kg per m2.
Order No. I-1384802 Price per unit EUR 6,90
Bitumex/Tyrofoam Below: heavy, high damping bitumen board for reducing structure-borne noise of loudspeaker cabinets and other vibrating surfaces. Single-sided self-adhesive. Weight / volume: 1.800 kg / cubic metre.
Centre and above: Tyrofoam, a heavy, high damping foam to absorb airborne sound, for lining the interior walls of a loudspeaker cabinet. Weight / volume: 140 kg / cubic metre.
Needle and wool felt Needle felt (left) and woo felt (same appearance, but denser) suitable for lining interior cabinet walls.
Damping 10 and Damping 30 Recycled felt self adhesiv.
Tyrotex Soft polyurethane foam based on polyester.
Mini Tyrotex MN10 Below: heavy, high damping bitumen board for reducing structure-borne noise of loudspeaker cabinets and other vibrating surfaces. Single-sided self-adhesive damping board Dimensions: 325 x 245 x 10 mm Weight / volume: 0.25 kg / cubic metre Price per unit - not available
Self-adhesive sealing tape made polyethylene foam in charcoal colour. We suggest MDM-5 for hi-fi and MDM-20 for PA applications.
For increasing the inner damping, suppression of partial vibration and linearisation of frequency response, also prevents diaphragm bleach.
Particularly suited for paper cone drivers. Remains water-soluble until hardened.
LTS-50 (V-5209). Price per 50 ml bottle: EUR 8,80
... Sound Varnish is based on an extremely expensive substance. Available in 10 ml container and upon request in 250 ml container.
This coating lacquer has a similar effect as C37 in helping to damp unwanted vibration. But Ultee Audiotechnik used a different road to success.
The lacquer increases the speed of sound in the soaked material, shifting the resonance to higher frequencies.
Every coat should be allowed to dry for 48 hours. Successive coats need even more time. Further hints by the manufacturer
Sound Varnish (ultee-sv10). Price per 10 ml bottle: EUR 24,95
New as of March 2004
Sound Vanish D (ultee-sv10-d). Price per 10 ml bottle: EUR 28,30 Sound Varnish hints by Mr Ultee himself: It's advisable to use an airbrush for diaphragms that suck-up immense quantities of lacquer (especially the thin paper diaphragms of full range drivers) to ensure thin and even distribution. Without the necessary expertise using a conventional brush, it's easy to soak the diaphragm beyond saturation point (one has to be quick). Even the cheapest airbrush with compressed air bottle instead of a compressor by Conrad Electronic (around 25 EUR for both) shows excellent results. For those who own expensive full range drivers (Lowther, AER or the big Fostex models) and don't have the courage to coat them, the airbrush is the answer.
50 ml bottle with black liquid
50 ml bottle with transparent liquid
Home