Loudspeaker Kit MiDu by Adm
Alcone ADM K+T CT H-hi-fi Eton Seas Excel Mivoc Mission newtronics Scan Vifa Visaton
newtronics Floorstanding Speakers Gate 5.1 NT52 Florian 13 Temperance Subwoofers Sub 5.1 Sub 15 /100 Sub 25 Drivers Drivers Amplifiers Power Amp

MiDu by ADM       Building Instruction

Technical data
- size (HxWxD): 120 x 28.4 x 42 cm
- rated impedance: 4 Ohm
- sensitivity: 90 dB (2.83V/1m)
- frequency range (-8dB): 30-20000 Hz
- speaker type: bass reflex
MiDu aus ADM 1/2007

After many enquiries in forums Udo Wohlgemut decided to design a loudspeaker where, against all tradition, the bass and midrange drivers differ by one inch.

The result is a speaker with a lot of bass presence but is no slouch in high frequencies and midrange either.

Excerpt of the review in ADM


"..I continue d with some rock and jazz, better known for their musicality than the quality of the recording. . The sound is grown-up, pleasant and straight. . Listening to well known CD's I noticed details, particularly in bass, that I had never heard before. Although I wanted to listen to only one track on Pink Floyd's "Dark Side Of The Moon" I carried on listening up to 2/3 of the recording. Somehow, via The Doors, Golden Earring, Jethro Tull and John McLaughlan (who's got by the way an excellent Web Site), I got to Supertramp's "Crime Of The Century". I had never heard the harmonica and vocals by Roger Hodgson on "School" performed with so much conviction and live character. I was really impressed how much pressure and diversity the drums developed. That's exactly what I had been looking for. Dynamics without irritation independent of volume and neutral reproduction... "
 

The kit for one speaker contains:

- 1x Eton ER 4 Air Motion Transformer
- 1x Eton 7-360/37 Hex midrange driver
- 2x Eton 8-800/37 Hex bass drivers
- 1 pair binding posts
- 6 packs polyester fleece damping material
- 28 x Pan screws 3.5x17
- 4m loudspeaker cable 2x1.5 mm2
- the building instruction		 The crossover kit contains per speaker:
- 3.9 mH Ferrobar
- 0.82 mH air core coil (1.4 mm wire)
- 0.1 mH air core coil (0.71 mm wire)
- 0.47 mH air core coil (0.71 mm wire)
- 100 µF ELCO non-etched
- 33 µF MKP capacitor
- 10 + 2.7 µF MKP capacitor
- 8.2 µF MKP capacitor
- 1.5 Ohm MOX4 resistor

MiDu kit without cabinet, price per speaker EUR 793,00

MiDu building instruction

MiDu - impedance correction for valve amps

If you want to use the MiDu together with a valve amp we recommend the following impedance correction:
- 6.8 µF ELCO, non-etched
- 100 µF ELCO, non-etched
- 0.39 mH air core coil (0.71 mm wire)
- 1.2 mH air core coil (1.00 mm wire)
- 2.7 Ohm Mox10 resistor
- 4.7 Ohm Mox10 resistor

Price for impedance correction, per speaker EUR 18,90
 
Building Instruction     ADM Kits     Home