Mivoice       taken from Klang+Ton 3/2005

Mivoice aus Klang+Ton 3/2005
technical Data:
- impedance: 8 Ohm
- SPL: 84 dB
- frequency range (-8dB): 40-21 000 Hz
- crossover frequencies: 2200 Hz
- size (HxWxD): 79 x 24 x 24 cm
- 2 way bass reflex speaker
Mivoice is a 2 way floorstanding speaker with Mivoc drivers:

Drivers used are the Mivoc XAW 180 HC mid / bass driver and the XGH 258 alu tweeter.

Review in K+T 3/2005:
"The Mivoice surprises with a low and clear bass that nobody would expect from such a small floorstanding speaker. Besides, the midrange is concise and entirely uncoloured. To be noticeable are the high frequencies, winning the listener over with energy and dynamics. The sound is lively and natural. The small horn brings to bear all its advantages. Particularly pleasing is that the teamwork of the components is not falling by the wayside, the sound is a uniform and integrated whole."...

The Mivoc drivers are beautifully finished and offer an excellent price / performance ratio.
 

Our kit contains:

  • 1 x Mivoc XGH 258 Alu tweeter
  • 1 x Mivoc XAW 180 HC bass driver
  • 1 x bass reflex tube HP50
  • 1 x terminal with gold plated brass binding posts
  • 1.5 x damping material
  • 0.5 x sealing tape
  • 12 x PAN screws for drivers
  • 2 m cable 2 x 1,5 mm2 for internal wiring
  • description and building instruction
  • the crossover components to be mounted on wood
  • 2.2 mH air core coil with 1.4 mm wire (10 windings to be unwound)
  • 0.68 mH air core coil, 0 7 mm wire
  • 10 uF MKT capacitor
  • 3.9 uF MKP capacitor
  • 5.6 Ohm MOX10 resistor (green-blue-gold)
  • 6.8 Ohm MOX10 resistor (blue-grey-gold)
    		•

    Order No. str-mivoice, price per unit (without cabinet)   EUR 117,00

    Home   K+T Overview