|
Sitronik 2 Way Full Range Amplifier VP 102 -
Technical Data:
Output: 2x 90W into 4 Ohm or 1x 180W into 8 Ohm
Crossover frequency: 40-240 Hz, adjustable
|
Full range amplifier for driving 4 or 8 Ohm loudspeakers. Black aluminium
front plate with two controls for both outputs.
With symmetrical XLR or asymmetrical RCA inputs; the RCA inputs are
looped for connecting further devices.
Outside dimensions (height x width): 320 x 170 mm.
For further information please consult the data
sheet in PDF
|
| |
 |
|
Technical Data:
Output: 150/180 Watt into 4 Ohm
Output: 120/140 Watt into 8 Ohm
Crossover frequency: 40-240 Hz, adjustable
|
Subwoofer amplifier for 4 or 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 3rd order filters, correction filter
for low bass boost (+2 dB at 34 Hz), automatic power-on, toroidal transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier) and RCA inputs; for both input types there are corresponding
outputs, therefore, the signal may be looped.
Controls for crossover frequency, phase (0-180 degrees) and volume.
Outside dimensions (height x width): 219 x 264 mm.
For further information please consult the data
sheet in PDF
|
| |
|
|
Technical Data:
Output: 200/250 Watt into 4 Ohm
Output: 150/180 Watt into 8 Ohm
Crossover frequency: 50-150 Hz, adjustable
|
Subwoofer amplifier for 4 or 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 4th order filters (24 dB/oct), correction
filter for low bass boost (+4 dB at 34 Hz), automatic power-on, toroidal
transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier) and RCA inputs; for both input types there are corresponding
outputs, therefore, the signal may be looped.
Controls for crossover frequency, phase (0-180 degrees) and volume.
Outside dimensions (height x width): 330 x 234 mm.
For further information please consult the data
sheet in PDF
|
| |
|
|
|
Technical Data:
Output: 240/350 Watt into 4 Ohm
Output: 200/250 Watt into 8 Ohm
Crossover frequency: 50-150 Hz, adjustable
|
Subwoofer amplifier for 4 or 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 4th order filters (24 dB/oct), correction
filter for low bass boost (+3 dB at 34 Hz), automatic power-on, toroidal
transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier) and RCA inputs; for both input types there are corresponding
outputs, therefore, the signal may be looped.
Controls for crossover frequency, phase (0-180 degrees) and volume.
Outside dimensions (height x width): 330 x 234 mm.
For further information please consult the data
sheet in PDF
|
| |
|
|
Technical Data:
Output: 360/460 Watt into 4 Ohm
Crossover frequency: 40-200 Hz, adjustable
|
Subwoofer amplifier for 4 or 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 2nd and 4th order filters (24 dB/oct),
3 parametric equalisers for adjusting frequency response (in conjunction
with DSP), delay for low level satellite outputs, toroidal transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier), RCA inputs and optical TOS-Link; the first two have corresponding
outputs. So the signal may be looped. Besides that, a RS 232/D9 plug
for connection to a PC (in preparation). Outside dimensions of the module
(height x width): 396 x 273 mm.
The module may be adjusted either at the front display, by remote control
or a PC. The front display is sized 149 x 73 mm and requires a cut-out
of 129 x 48 mm.
For further information please consult the data
sheet in PDF
Informations to DSP you find here
|
| |
|
|
Technical Data:
Output: 510/670 Watt into 4 Ohm
(with 1000 VA transformer: 600/750 Watt)
Crossover frequency: 40-200 Hz, adjustable
|
Subwoofer amplifier for 4 or 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 2nd and 4th order filters (24 dB/oct),
3 parametric equalisers for adjusting frequency response (in conjunction
with DSP), delay for low level satellite outputs, toroidal transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier), RCA inputs and optical TOS-Link; the first two have corresponding
outputs. So the signal may be looped. Besides that, a RS 232/D9 plug
for connection to a PC (in preparation). Outside dimensions of the module
(height x width): 500 x 330 mm.
The module may be adjusted either at the front display, by remote control
or a PC. The front display is sized 149 x 73 mm and requires a cut-out
of 129 x 48 mm.
For further information please consult the data
sheet in PDF
Additional charge for 1000 VA toroidal transformer: on request (_)
Informations to DSP you find here
|
| |
|
|
Sitronik VP 1000 D
-
Technical Data:
Output: 2x 550/2x 850 Watt into 4 Ohm
Output: 2x 850/2x 1100 Watt into 2 Ohm
Crossover frequency: 20-200 Hz, adjustable
|
Subwoofer amplifier for 2 to 8 Ohm drivers with black aluminium front plate,
adjustable crossover frequency with 2nd and 4th order filters (24 dB/oct),
3 parametric equalisers for adjusting frequency response (in conjunction
with DSP), delay for low level satellite outputs, toroidal transformer.
With high level inputs (for connection to loudspeaker outputs of an
amplifier), RCA inputs and optical TOS-Link; the first two have corresponding
outputs. So the signal may be looped. Besides that, a RS 232/D9 plug
for connection to a PC (in preparation). Outside dimensions of the module
(height x width): 710 x 350 mm.
The module may be adjusted either at the front display, by remote control
or a PC. The front display is sized 149 x 73 mm and requires a cut-out
of 129 x 48 mm.
For further information please consult the data
sheet in PDF
Informations to DSP you find here
|
| |
|