Vifa-Lautsprecher

Tweeter
	HT 250 HNF/4 order no. A-HT250HNF-4 EUR 24,00 25 mm dome tweeter with fabric dome. The voice coil windings are immersed in magnetic fluid to increase short term power handling capacity, to reduce the compression and the Q factor.. A magnet system based on Neodymium magnets is used. power handling (continuous/programme) = 60/160 W resonance frequency fs = 1350 Hz impedance R = 4 Ohm sound pressure level SPL = 93 dB (2,83V; 1m) DC resistance Re = 2,9 Ohm force factor BL = 1,7 N/A effective piston radiating area Sd = 6,8 cm2 effective mechanical mass incl. air load 0,27 g total Q factor Qts = 1,26 (Qms=2,8, Qes=2,3) maximum peak linear excursion vibration x_lin = +/- 0,1 mm mounting diameter d = 45 mm overall diameter d = 70 mm mounting depth (not countersunk) t = 32 mm PDF data sheet
	HT 250 F/4 order no. A-HT250F-4 EUR 28,00 25 mm dome tweeter with fabric dome. The voice coil windings are immersed in magnetic fluid to increase short term power handling capacity, to reduce the compression and the Q factor.. power handling (continuous/programme) = 80/200 W resonance frequency fs = 1100 Hz impedance R = 4 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 2,1 N/A effective piston radiating area Sd = 6,8 cm2 effective mechanical mass incl. air load 0,33 g total Q factor Qts = 1,04 (Qms=3,4, Qes=1,5) maximum peak linear excursion vibration x_lin = +/- 0,6 mm mounting diameter d = 70 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 31 mm PDF data sheet
	HT 270 VF/6 order no. A-HT270VF-6 EUR 42,00 26 mm dome tweeter with fabric dome. The voice coil windings are immersed in magnetic fluid to increase short term power handling capacity, to reduce the compression and the Q factor.. power handling (continuous/programme) = 100/225 W resonance frequency fs = 650 Hz impedance R = 6 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 4,6 Ohm force factor BL = 2,7 N/A effective piston radiating area Sd = 7,1 cm2 effective mechanical mass incl. air load 0,3 g equivalent volume of compliance Vas = 0,014 l total Q factor Qts = 0,43 (Qms=0,95, Qes=0,77) maximum peak linear excursion vibration x_lin = +/- 0,2 mm mounting diameter d = 75 mm overall diameter d = 104,2 mm mounting depth (not countersunk) t = 44 mm PDF data sheet
	HT 300 VF/6 order no. A-HT300VF-6 EUR 49,90 dome tweeter with high quality dome. The voice coil windings are immersed in magnetic fluid to increase short term power handling capacity, to reduce the compression and the Q factor.. impedance R = 6 Ohm sound pressure level SPL = 90 dB (2,83V; 1m)
	XD 200 F/4 order no. A-XD200F-4 EUR 38,00 tweeter with high quality cone. impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m)
	XD 270 F/4 order no. A-XD270F-4 EUR 38,00 25 mm dome tweeter with fabric dome. The voice coil windings are immersed in magnetic fluid to increase short term power handling capacity, to reduce the compression and the Q factor.. power handling (continuous/programme) = 140/400 W resonance frequency fs = 650 Hz impedance R = 4 Ohm sound pressure level SPL = 90,5 dB (2,83V; 1m) DC resistance Re = 2,75 Ohm force factor BL = 2,2 N/A effective piston radiating area Sd = 7 cm2 effective mechanical mass incl. air load 0,42 g total Q factor Qts = 0,67 (Qms=4,32, Qes=0,79) maximum peak linear excursion vibration x_lin = +/- 0,25 mm mounting diameter d = 74 mm overall diameter d = 104,2 mm mounting depth (not countersunk) t = 32 mm PDF data sheet
	XT 200 K/4 order no. A-XT200K EUR 54,00 19 mm tweeter with high quality cone. power handling (continuous/programme) = 80/200 W resonance frequency fs = 690 Hz impedance R = 4 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 2,9 Ohm force factor BL = 1,7 N/A voice coil inductance L = 0,012 mH effective piston radiating area Sd = 4,55 cm2 effective mechanical mass incl. air load 0,2 g total Q factor Qts = 0,61 (Qms=2,39, Qes=0,82) maximum peak linear excursion vibration x_lin = +/- 0,35 mm mounting diameter d = 64 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 40 mm PDF data sheet
	XT 300 K/4 order no. A-XT300K-4 EUR 58,00 25 mm tweeter with high quality cone. power handling (continuous/programme) = 140/400 W resonance frequency fs = 500 Hz impedance R = 4 Ohm sound pressure level SPL = 88,5 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 2,5 N/A effective piston radiating area Sd = 6 cm2 effective mechanical mass incl. air load 0,3 g total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45) mounting diameter d = 74 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 48 mm
	XT 300 KS/4 order no. A-XT300KS-4 EUR 59,00 25 mm tweeter with high quality cone. power handling (continuous/programme) = 140/400 W resonance frequency fs = 500 Hz impedance R = 4 Ohm sound pressure level SPL = 87,5 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 2,2 N/A effective piston radiating area Sd = 6 cm2 effective mechanical mass incl. air load 0,3 g equivalent volume of compliance Vas = 0,017 l total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 72 mm overall diameter d = 104,2 mm mounting depth (not countersunk) t = 51 mm PDF data sheet
	XT 300 V/4 order no. A-XT300V-4 EUR 128,00 25 mm tweeter with high quality cone. power handling (continuous/programme) = 140/400 W resonance frequency fs = 500 Hz impedance R = 4 Ohm sound pressure level SPL = 88,5 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 2,5 N/A effective piston radiating area Sd = 6 cm2 effective mechanical mass incl. air load 0,3 g equivalent volume of compliance Vas = 0,017 l total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 75 mm overall diameter d = 104,2 mm mounting depth (not countersunk) t = 46 mm PDF data sheet
	XT 300 VS/4 order no. A-XT300VS-4 EUR 136,00 25 mm tweeter with high quality cone. power handling (continuous/programme) = 140/400 W resonance frequency fs = 500 Hz impedance R = 4 Ohm sound pressure level SPL = 87,5 dB (2,83V; 1m) DC resistance Re = 3 Ohm force factor BL = 2,2 N/A effective piston radiating area Sd = 6 cm2 effective mechanical mass incl. air load 0,3 g equivalent volume of compliance Vas = 0,017 l total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45) maximum peak linear excursion vibration x_lin = +/- 0,5 mm mounting diameter d = 72 mm overall diameter d = 104,2 mm mounting depth (not countersunk) t = 51 mm PDF data sheet
	XT 300HV-Neo/4 order no. A-XT300HVNeo4 EUR 119,00 25 mm tweeter with high quality cone. A magnet system based on Neodymium magnets is used. power handling (continuous/programme) = 60/160 W resonance frequency fs = 850 Hz impedance R = 4 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 3,1 Ohm force factor BL = 1,7 N/A voice coil inductance L = 0,04 mH effective piston radiating area Sd = 6 cm2 effective mechanical mass incl. air load 0,3 g total Q factor Qts = 0,92 (Qms=6, Qes=1,09) maximum peak linear excursion vibration x_lin = +/- 0,35 mm mounting diameter d = 72 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 38 mm PDF data sheet
Mids
	PLM 11 225/5 order no. A-PLM11-225-8 EUR 85,00 midrange driver with high quality cone. impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m)
recommended cabinet 1: closed cabinet with 1,9 L volume from 116/73 Hz (-3dB/-8dB) recommended cabinet 2: 7,9 L volume bass reflex cabinet with HP50 reflex tube, 16 cm long. from 54/45 Hz (-3dB/-8dB).	PWL 11 125/8 order no. A-PWL11-125-8 no longer deliverable 11 cm midrange driver with paper cone. The basket is made of die-cast. power handling (continuous/programme) = 40/80 W resonance frequency fs = 69 Hz impedance R = 8 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 4,9 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 58 cm2 effective mechanical mass incl. air load 5,9 g equivalent volume of compliance Vas = 4,25 l total Q factor Qts = 0,47 (Qms=2,2, Qes=0,6) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 101 mm overall diameter d = 125,2 mm mounting depth (not countersunk) t = 59,1 mm PDF data sheet
recommended cabinet 1: closed cabinet with 2,8 L volume from 103/65 Hz (-3dB/-8dB) recommended cabinet 2: 9,3 L volume bass reflex cabinet with HP50 reflex tube, 18 cm long. from 54/42 Hz (-3dB/-8dB).	PWL 14 232/8 order no. A-PWL14-232-8 no longer deliverable 13 cm midrange driver with paper cone. The basket is made of die-cast. power handling (continuous/programme) = 50/140 W resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 5,5 N/A voice coil inductance L = 0,49 mH effective piston radiating area Sd = 80 cm2 effective mechanical mass incl. air load 8 g equivalent volume of compliance Vas = 14 l total Q factor Qts = 0,35 (Qms=1,75, Qes=0,44) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 115 mm overall diameter d = 149 mm mounting depth (not countersunk) t = 69,8 mm PDF data sheet
Woofer
recommended cabinet 1: closed cabinet with 5,5 L volume from 107/67 Hz (-3dB/-8dB) recommended cabinet 2: 19 L volume bass reflex cabinet with HP70 reflex tube, 14 cm long. from 55/44 Hz (-3dB/-8dB).	17 WN 225/8 order no. A-17WN225-8 EUR 73,00 16 cm bass driver with paper cone. power handling (continuous/programme) = 60/90 W resonance frequency fs = 48 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 6,7 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 143 cm2 effective mechanical mass incl. air load 11 g equivalent volume of compliance Vas = 26 l total Q factor Qts = 0,36 (Qms=2,4, Qes=0,42) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 146 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 76 mm PDF data sheet
recommended cabinet 1: closed cabinet with 10,2 L volume from 74/47 Hz (-3dB/-8dB) recommended cabinet 2: 36 L volume bass reflex cabinet with HP70 reflex tube, 16 cm long. from 38/30 Hz (-3dB/-8dB).	XG 18 225/8 order no. A-XG18-225-8 - not available 16 cm midrange driver with glass fibre cone. power handling (continuous/programme) = 70/90 W resonance frequency fs = 34 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 5,6 N/A voice coil inductance L = 0,53 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 11,8 g equivalent volume of compliance Vas = 45 l total Q factor Qts = 0,37 (Qms=1,77, Qes=0,46) maximum peak linear excursion vibration x_lin = +/- 5 mm mounting diameter d = 145,5 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 76,2 mm PDF data sheet
recommended cabinet 1: closed cabinet with 8,6 L volume from 82/52 Hz (-3dB/-8dB) recommended cabinet 2: 30 L volume bass reflex cabinet with HP70 reflex tube, 15 cm long. from 42/33 Hz (-3dB/-8dB).	XW 18 325/8 order no. A-XW18-352-8 - not available 16 cm bass driver with high quality cone. The basket is made of die-cast. power handling (continuous/programme) = 100/300 W resonance frequency fs = 38 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 6,2 N/A voice coil inductance L = 0,54 mH effective piston radiating area Sd = 129 cm2 effective mechanical mass incl. air load 11,1 g equivalent volume of compliance Vas = 38 l total Q factor Qts = 0,37 (Qms=5,87, Qes=0,39) maximum peak linear excursion vibration x_lin = +/- 4,5 mm mounting diameter d = 146 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 76,2 mm PDF data sheet
recommended cabinet 1: closed cabinet with 4,7 L volume from 89/56 Hz (-3dB/-8dB) recommended cabinet 2: 16 L volume bass reflex cabinet with HP50 reflex tube, 13 cm long. from 47/37 Hz (-3dB/-8dB).	PLW 18 340/8 order no. A-PLW18-340-8 - not available 16 cm bass driver with paper cone. The basket is made of die-cast. power handling (continuous/programme) = 100/300 W resonance frequency fs = 39 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 7,7 N/A voice coil inductance L = 0,85 mH effective piston radiating area Sd = 132 cm2 effective mechanical mass incl. air load 17,5 g equivalent volume of compliance Vas = 24 l total Q factor Qts = 0,35 (Qms=2,42, Qes=0,41) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 145 mm overall diameter d = 181 mm mounting depth (not countersunk) t = 84 mm PDF data sheet
recommended cabinet 1: closed cabinet with 14,5 L volume from 74/47 Hz (-3dB/-8dB) recommended cabinet 2: 43 L volume bass reflex cabinet with HP100 reflex tube, 31 cm long. from 41/32 Hz (-3dB/-8dB).	21 WN 340/8 order no. A-21WN340-8 EUR 93,00 20 cm bass driver with paper cone. The basket is made of die-cast. power handling (continuous/programme) = 80/120 W resonance frequency fs = 28 Hz impedance R = 8 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 8,2 N/A voice coil inductance L = 1 mH effective piston radiating area Sd = 235 cm2 effective mechanical mass incl. air load 23 g equivalent volume of compliance Vas = 105 l total Q factor Qts = 0,3 (Qms=1,97, Qes=0,35) maximum peak linear excursion vibration x_lin = +/- 6 mm mounting diameter d = 187 mm overall diameter d = 216 mm mounting depth (not countersunk) t = 87 mm PDF data sheet
recommended cabinet 1: closed cabinet with 11 L volume from 61/39 Hz (-3dB/-8dB) recommended cabinet 2: 36 L volume bass reflex cabinet with HP70 reflex tube, 25 cm long. from 32/25 Hz (-3dB/-8dB).	PLW 22 450/8 order no. A-PLW22-450-8 - not available 21 cm bass driver with paper cone. power handling (continuous/programme) = 125/350 W resonance frequency fs = 26 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 5,9 Ohm force factor BL = 10,9 N/A voice coil inductance L = 2,7 mH effective piston radiating area Sd = 224 cm2 effective mechanical mass incl. air load 44 g equivalent volume of compliance Vas = 60 l total Q factor Qts = 0,34 (Qms=5,13, Qes=0,36) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 186 mm overall diameter d = 226 mm mounting depth (not countersunk) t = 99 mm PDF data sheet
recommended cabinet 1: closed cabinet with 21 L volume from 65/41 Hz (-3dB/-8dB) recommended cabinet 2: 65 L volume bass reflex cabinet with HP100 reflex tube, 26 cm long. from 35/27 Hz (-3dB/-8dB).	PLW 26 452/8 order no. A-PLW26-452-8 - not available 25 cm bass driver with paper cone. power handling (continuous/programme) = 125/350 W resonance frequency fs = 26 Hz impedance R = 8 Ohm sound pressure level SPL = 88,5 dB (2,83V; 1m) DC resistance Re = 5,9 Ohm force factor BL = 11 N/A voice coil inductance L = 1,8 mH effective piston radiating area Sd = 337 cm2 effective mechanical mass incl. air load 45 g equivalent volume of compliance Vas = 130 l total Q factor Qts = 0,32 (Qms=2,82, Qes=0,36) maximum peak linear excursion vibration x_lin = +/- 6,5 mm mounting diameter d = 232 mm overall diameter d = 271 mm mounting depth (not countersunk) t = 107 mm PDF data sheet
recommended cabinet 1: closed cabinet with 21 L volume from 38/24 Hz (-3dB/-8dB) recommended cabinet 2: 76 L volume bass reflex cabinet with HP70 reflex tube, 32 cm long. from 19/15 Hz (-3dB/-8dB).	26 WA 550/4 order no. A-26WA550-4 EUR 197,00 25 cm bass driver with aluminium cone. power handling (continuous/programme) = 150/350 W resonance frequency fs = 18,5 Hz impedance R = 4 Ohm sound pressure level SPL = 83,5 dB (2,83V; 1m) DC resistance Re = 3,5 Ohm force factor BL = 12,2 N/A voice coil inductance L = 1,43 mH effective piston radiating area Sd = 346 cm2 effective mechanical mass incl. air load 129 g equivalent volume of compliance Vas = 80 l total Q factor Qts = 0,37 (Qms=3,37, Qes=0,42) maximum peak linear excursion vibration x_lin = +/- 11,6 mm mounting diameter d = 232 mm overall diameter d = 272 mm mounting depth (not countersunk) t = 130 mm PDF data sheet
Full Range
	9 BGS 119/8 order no. A-9BGS119-8 - not available 8 cm full range driver with glass fibre cone. The driver is magnetically shielded. power handling (continuous/programme) = 30/60 W resonance frequency fs = 87 Hz impedance R = 8 Ohm sound pressure level SPL = 83 dB (2,83V; 1m) DC resistance Re = 6,3 Ohm force factor BL = 2,95 N/A voice coil inductance L = 0,12 mH effective piston radiating area Sd = 38 cm2 effective mechanical mass incl. air load 2,2 g equivalent volume of compliance Vas = 3,1 l total Q factor Qts = 0,68 (Qms=3,08, Qes=0,87) maximum peak linear excursion vibration x_lin = +/- 2,35 mm mounting diameter d = 79 mm overall diameter d = 84 mm mounting depth (not countersunk) t = 49 mm PDF data sheet
	10 BG 120/6 order no. A-10BG120-6 - not available 9 cm full range driver with glass fibre cone. The basket is made of die-cast. power handling (continuous/programme) = 30/50 W resonance frequency fs = 95 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 4 Ohm force factor BL = 3,1 N/A voice coil inductance L = 0,47 mH effective piston radiating area Sd = 38 cm2 effective mechanical mass incl. air load 3,5 g equivalent volume of compliance Vas = 1,5 l total Q factor Qts = 0,81 (Qms=4,57, Qes=0,98) maximum peak linear excursion vibration x_lin = +/- 0,8 mm mounting diameter d = 82 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 41 mm PDF data sheet
recommended cabinet 1: closed cabinet with 1,6 L volume from 124/78 Hz (-3dB/-8dB) recommended cabinet 2: 6,4 L volume bass reflex cabinet with HP35 reflex tube, 8 cm long. from 56/48 Hz (-3dB/-8dB).	10 BGS 119/8 order no. A-10BGS119-8 - not available 9 cm full range driver with glass fibre cone. power handling (continuous/programme) = 30/60 W resonance frequency fs = 81 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 3,8 N/A voice coil inductance L = 0,33 mH effective piston radiating area Sd = 38 cm2 effective mechanical mass incl. air load 3,2 g equivalent volume of compliance Vas = 2,5 l total Q factor Qts = 0,52 (Qms=3,4, Qes=0,62) maximum peak linear excursion vibration x_lin = +/- 0,65 mm mounting diameter d = 82 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 50 mm PDF data sheet
Coaxial speaker
	17CN225-XT/8 order no. A-17CN225-8-xt EUR 193,00 . sound pressure level SPL = 89, 90 dB (2,83V; 1m)
no longer sold
	HT 200F/6 order no. A-HT200F-6 - not available 20 mm tweeter with fabric cone. power handling (continuous/programme) = 100/200 W resonance frequency fs = 1700 Hz impedance R = 4 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 4,2 Ohm mounting diameter d = 62 mm overall diameter d = 94 mm mounting depth (not countersunk) t = 24 mm PDF data sheet
	HT 260 NF/6 order no. A-HT260NF-6 - not available 25 mm tweeter with fabric cone. power handling (continuous/programme) = 100/200 W resonance frequency fs = 1500 Hz impedance R = 6 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 4,6 Ohm mounting diameter d = 50 mm overall diameter d = 70 mm mounting depth (not countersunk) t = 27 mm
	HT 260 HVF/6 (Für ct 178) order no. A-HT260HVF-6 - not available 26 mm tweeter with fabric cone. power handling (continuous/programme) = 100/225 W resonance frequency fs = 940 Hz impedance R = 6 Ohm sound pressure level SPL = 95 dB (2,83V; 1m) DC resistance Re = 4,6 Ohm mounting diameter d = 74 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 58 mm PDF data sheet
	HT 270 VF/6 order no. A-HT270VF-6 EUR 42,00 26 mm tweeter with fabric cone. power handling (continuous/programme) = 100/200 W resonance frequency fs = 650 Hz impedance R = 6 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 4,6 Ohm mounting diameter d = 74 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 44 mm PDF data sheet
	PLH 270 VF/6 order no. A-PLH270VF-6 - not available 26 mm tweeter with high quality cone. power handling (continuous/programme) = 100/200 W resonance frequency fs = 750 Hz impedance R = 6 Ohm sound pressure level SPL = 90 dB (2,83V; 1m) DC resistance Re = 4,6 Ohm force factor BL = 2,7 N/A effective piston radiating area Sd = 7,1 cm2 effective mechanical mass incl. air load 0,32 g equivalent volume of compliance Vas = 0,01 l total Q factor Qts = 0,52 (Qms=1,17, Qes=0,95) mounting diameter d = 74 mm overall diameter d = 104 mm mounting depth (not countersunk) t = 44 mm PDF data sheet
recommended cabinet 1: closed cabinet with 1,9 L volume from 116/73 Hz (-3dB/-8dB) recommended cabinet 2: 7,9 L volume bass reflex cabinet with HP50 reflex tube, 16 cm long. from 54/45 Hz (-3dB/-8dB).	PLW 11 125/8 order no. A-PLW11-125-8 - not available 11 cm bass driver with paper cone. power handling (continuous/programme) = 40/80 W resonance frequency fs = 69 Hz impedance R = 8 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 4,9 N/A voice coil inductance L = 0,61 mH effective piston radiating area Sd = 58 cm2 effective mechanical mass incl. air load 5,9 g equivalent volume of compliance Vas = 4,25 l total Q factor Qts = 0,47 (Qms=2,2, Qes=0,6) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 100 mm overall diameter d = 125 mm mounting depth (not countersunk) t = 59 mm PDF data sheet
recommended cabinet 1: closed cabinet with 1,5 L volume from 168/106 Hz (-3dB/-8dB) recommended cabinet 2: 3,9 L volume bass reflex cabinet with HP35 reflex tube, 7 cm long. from 97/73 Hz (-3dB/-8dB).	13 MN 125/8 order no. A-13MN125-8 - not available 13 cm midrange driver with paper cone. power handling (continuous/programme) = 50/80 W resonance frequency fs = 57 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 5,88 N/A voice coil inductance L = 0,45 mH effective piston radiating area Sd = 80 cm2 effective mechanical mass incl. air load 5,5 g equivalent volume of compliance Vas = 13,5 l total Q factor Qts = 0,27 (Qms=1,8, Qes=0,32) maximum peak linear excursion vibration x_lin = +/- 1 mm mounting diameter d = 115 mm overall diameter d = 140 mm mounting depth (not countersunk) t = 62 mm PDF data sheet
recommended cabinet 1: closed cabinet with 2,9 L volume from 104/65 Hz (-3dB/-8dB) recommended cabinet 2: 9,7 L volume bass reflex cabinet with HP50 reflex tube, 17 cm long. from 55/43 Hz (-3dB/-8dB).	13 WN 125/8 order no. A-13WN125-8 - not available 13 cm bass driver with paper cone. power handling (continuous/programme) = 50/80 W resonance frequency fs = 44 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 5,4 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 85 cm2 effective mechanical mass incl. air load 7,5 g equivalent volume of compliance Vas = 16 l total Q factor Qts = 0,34 (Qms=2,5, Qes=0,39) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 115 mm overall diameter d = 140 mm mounting depth (not countersunk) t = 62 mm PDF data sheet
recommended cabinet 1: closed cabinet with 2,4 L volume from 124/78 Hz (-3dB/-8dB) recommended cabinet 2: 8 L volume bass reflex cabinet with HP50 reflex tube, 14 cm long. from 64/51 Hz (-3dB/-8dB).	13 WNS 125/8, shielded order no. A-13WNS125-8 - not available 13 cm bass driver with paper cone. power handling (continuous/programme) = 50/80 W resonance frequency fs = 54 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 5,4 N/A voice coil inductance L = 0,7 mH effective piston radiating area Sd = 85 cm2 effective mechanical mass incl. air load 6,5 g equivalent volume of compliance Vas = 12 l total Q factor Qts = 0,35 (Qms=1,5, Qes=0,46) maximum peak linear excursion vibration x_lin = +/- 2 mm mounting diameter d = 115 mm overall diameter d = 140 mm mounting depth (not countersunk) t = 74 mm PDF data sheet
recommended cabinet 1: closed cabinet with 2,8 L volume from 103/65 Hz (-3dB/-8dB) recommended cabinet 2: 9,3 L volume bass reflex cabinet with HP50 reflex tube, 18 cm long. from 54/42 Hz (-3dB/-8dB).	PLW 14 232/8 order no. A-PLW14-232-8 - not available 13 cm bass driver with paper cone. power handling (continuous/programme) = 50/90 W resonance frequency fs = 45 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 5,5 N/A voice coil inductance L = 0,49 mH effective piston radiating area Sd = 80 cm2 effective mechanical mass incl. air load 8 g equivalent volume of compliance Vas = 14 l total Q factor Qts = 0,35 (Qms=1,75, Qes=0,44) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 115 mm overall diameter d = 149 mm mounting depth (not countersunk) t = 69 mm PDF data sheet
recommended cabinet 1: closed cabinet with 5,5 L volume from 111/70 Hz (-3dB/-8dB) recommended cabinet 2: 19 L volume bass reflex cabinet with HP70 reflex tube, 12 cm long. from 57/45 Hz (-3dB/-8dB).	M17WH-09-08 (ct 165, 178) order no. A-M17WH-09-08 EUR 69,00 16 cm bass driver with high quality cone. power handling (continuous/programme) = 60/90 W resonance frequency fs = 50 Hz impedance R = 8 Ohm sound pressure level SPL = 91 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 6,7 N/A voice coil inductance L = 0,8 mH effective piston radiating area Sd = 143 cm2 effective mechanical mass incl. air load 11 g equivalent volume of compliance Vas = 26 l total Q factor Qts = 0,36 (Qms=2,39, Qes=0,42) maximum peak linear excursion vibration x_lin = +/- 3 mm mounting diameter d = 146 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 76 mm
recommended cabinet 1: closed cabinet with 6,9 L volume from 85/53 Hz (-3dB/-8dB) recommended cabinet 2: 23 L volume bass reflex cabinet with HP70 reflex tube, 19 cm long. from 44/35 Hz (-3dB/-8dB).	17 WP 232/8 (like 17 WP 200) order no. A-17WP232-8 - not available 16 cm bass driver with polypropylene cone. power handling (continuous/programme) = 70/105 W resonance frequency fs = 37 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 6,5 N/A voice coil inductance L = 0,55 mH effective piston radiating area Sd = 136 cm2 effective mechanical mass incl. air load 14 g equivalent volume of compliance Vas = 35 l total Q factor Qts = 0,35 (Qms=1,55, Qes=0,45) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 146 mm overall diameter d = 170 mm mounting depth (not countersunk) t = 76 mm PDF data sheet
recommended cabinet 1: closed cabinet with 21 L volume from 70/44 Hz (-3dB/-8dB) recommended cabinet 2: 85 L volume bass reflex cabinet with HP70 reflex tube, 5 cm long. from 32/27 Hz (-3dB/-8dB).	BC18 WG49-08 order no. A-BC18WG49 EUR 29,00 16 cm midrange driver with paper cone. power handling (continuous/programme) = 90/160 W resonance frequency fs = 46,9 Hz impedance R = 8 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 5,7 Ohm force factor BL = 5 N/A voice coil inductance L = 0,82 mH effective piston radiating area Sd = 138 cm2 effective mechanical mass incl. air load 10 g equivalent volume of compliance Vas = 31 l total Q factor Qts = 0,54 (Qms=2,67, Qes=0,67) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 146 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 68 mm PDF data sheet
recommended cabinet 1: closed cabinet with 20 L volume from 62/39 Hz (-3dB/-8dB) recommended cabinet 2: 82 L volume bass reflex cabinet with HP70 reflex tube, 8 cm long. from 29/24 Hz (-3dB/-8dB).	TC 18 WG 49 08/8 (for TC18 WG69-08 round) order no. A-TC18WG49-8 EUR 57,00 16 cm bass driver with high quality cone. power handling (continuous/programme) = 35/50 W resonance frequency fs = 37 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 5,5 Ohm force factor BL = 5 N/A voice coil inductance L = 0,75 mH effective piston radiating area Sd = 138 cm2 effective mechanical mass incl. air load 11,2 g equivalent volume of compliance Vas = 44 l total Q factor Qts = 0,47 (Qms=2,62, Qes=0,58) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 147 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 72 mm
recommended cabinet 1: closed cabinet with 14,5 L volume from 61/38 Hz (-3dB/-8dB) recommended cabinet 2: 55 L volume bass reflex cabinet with HP70 reflex tube, 15 cm long. from 30/24 Hz (-3dB/-8dB).	PLW 18 225/8 order no. A-PLW18-225-8 - not available 16 cm bass driver with paper cone. power handling (continuous/programme) = 60/90 W resonance frequency fs = 31 Hz impedance R = 8 Ohm sound pressure level SPL = 89 dB (2,83V; 1m) DC resistance Re = 5,8 Ohm force factor BL = 5,82 N/A voice coil inductance L = 0,6 mH effective piston radiating area Sd = 138 cm2 effective mechanical mass incl. air load 12,5 g equivalent volume of compliance Vas = 49,5 l total Q factor Qts = 0,4 (Qms=2,8, Qes=0,47) maximum peak linear excursion vibration x_lin = +/- 5 mm mounting diameter d = 145 mm overall diameter d = 181 mm mounting depth (not countersunk) t = 77 mm PDF data sheet
recommended cabinet 1: closed cabinet with 3,6 L volume from 95/60 Hz (-3dB/-8dB) recommended cabinet 2: 10,8 L volume bass reflex cabinet with HP50 reflex tube, 18 cm long. from 52/40 Hz (-3dB/-8dB).	PL 18 WO 09 4 order no. A-PL18WO09-4 - not available 16 cm bass driver with paper cone. power handling (continuous/programme) = 100/300 W resonance frequency fs = 37 Hz impedance R = 4 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) effective piston radiating area Sd = 132 cm2 equivalent volume of compliance Vas = 24 l total Q factor Qts = 0,3 (Qms=2,49, Qes=0,34) mounting diameter d = 145 mm overall diameter d = 181 mm mounting depth (not countersunk) t = 84 mm
recommended cabinet 1: closed cabinet with 30 L volume from 54/34 Hz (-3dB/-8dB) recommended cabinet 2: 113 L volume bass reflex cabinet with HP100 reflex tube, 19 cm long. from 27/22 Hz (-3dB/-8dB).	PLW 26 450/8 order no. A-PLW26-450-8 no longer deliverable 25 cm bass driver with paper cone. power handling (continuous/programme) = 125/350 W resonance frequency fs = 27 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,6 Ohm force factor BL = 10,9 N/A voice coil inductance L = 2,7 mH effective piston radiating area Sd = 337 cm2 effective mechanical mass incl. air load 51 g equivalent volume of compliance Vas = 110 l total Q factor Qts = 0,39 (Qms=4,46, Qes=0,43) maximum peak linear excursion vibration x_lin = +/- 4 mm mounting diameter d = 232 mm overall diameter d = 272 mm mounting depth (not countersunk) t = 107 mm PDF data sheet
	30 WN 380 RL/8 order no. A-30WN380RL-8 - not available . impedance R = 8 Ohm

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Vifa

Tweeter

Mids

Woofer

Full Range

Coaxial speaker

no longer sold